CM Centrifuge

CM-6M centrifuge for 15 ml tubes

Description

CM-6M table centrifuge with 6M rotor is used for dividing solutions into fractions. It is intended for work with 15ml laboratory tubes. The centrifuge is equipped with a removable bucket rotor with attached adapters and a microcontroller control system. Reliability, simplicity and ease of operation ensure a wide range of application of the device in medicine, biology, analytical chemistry, etc.

Properties:

- Setting and displaying rotor time and speed on light indicators.

- Lid lock during operation.

- Unbalance sensor,

- Audible alarm when the rotor stops,

- Automatic unlocking and opening of the lid after centrifuge stop.

- Quiet operation.

- Ultra-precise digital rotor speed control.

- Virtually unlimited continuous operation.

Parameters of the rotor used:

- Number of adapters in rotor: 12

- Maximum volume of test tubes to be used: 15 ml

- maximum centrifugation speed: 3500 rpm

Technical parameters

Centrifugation speed, RPM: 100-3500

Maximum gravity field, RCF 1700

Accuracy of rotation speed control,% ±0,5

Timer,min. 1-99

Discontinuity of the rotor speed setting,rpm 100

Noise level at the distance of 1 m, dB (A) max 55

Permissible temperature range, C +10.....+40

Permissible ambient humidity, % 80

Mains power supply, V, Hz 220, 50

Power consumption, W 250

Dimensions, mm 425 x 410 x 230

Weight 10,8 kg

CM-6M.01 centrifuge for 50 ml.

Description

Table centrifuge CM-6M with 6M.01 rotor is used for dividing solutions into fractions. It is intended for work with 50ml laboratory tubes. Centrifuge is equipped with a removable bucket rotor with attachable adapters and a microcontroller control system. Reliability, simplicity and ease of use of centrifuge CM-6M provides a wide range of applications of the device in medicine, biology, analytical chemistry, etc.

Properties:

- Setting and displaying the time and rotor speed on the light indicators.

- Lid lock during operation.

- Sensor of unbalance,

- Audible alarm when rotor stops,

- Automatic unlocking and opening of the lid after centrifuge stop.

- Quiet operation.

- Ultra-precise digital rotor speed control.

- Virtually unlimited continuous operation.

Advantages of

The smallest possible footprint, the simple operation, the absence of noise and vibration, the high efficiency and the ease of use.

Parameters of the rotor used

- Number of adapters in the rotor: 4

- Max. volume of used test tubes: 50 ml

- maximum dimensions of test tubes to be used: 30 mm x 135 mm

- maximum centrifugation speed: 3500 rpm

Technical parameters

Centrifugation speed, RPM 100-3500

Maximum Gravity Field, RCF 2300

Accuracy of rotation speed control,% ±0,5

Timer,min. 1-99

Discontinuity of rotor speed setting,rpm 100

Noise level at the distance of 1 m, dB (A), max 55

Operating temperature range, C +10....+45

Permissible total imbalance of tubes, g, not more: 5

Permissible humidity of environment,% 80

Mains power supply, V, Hz 220,50

Allowed voltage range, V 190-240

Power consumption, W 320

Dimensions, mm 430 x 400 x 230

Weight 11 kg

CM-6MT centrifuge with 6M.02 rotor for 24 ppm

Description

Centrifuge CM-6MT with 6M.02 rotor is a new model of centrifuge, Latvia.

CM-6MT centrifuge is used for clinical laboratory diagnostics and research in medicine, biology, chemistry and other fields.

The centrifuge allows the rotor speed to be set between 100 and 3500 rpm, with a digital indication of the rotor speed that is actually set. A timer can be used to control the centrifugation time. At the end of the cycle the rotor is stopped by a built-in electromagnetic brake.

As the tubes rotate, they move into a horizontal position, allowing a clear horizontal separation, which is convenient for further liquid fractionation.

The centrifuge is equipped with a 24-seat 6M.02 universal rotor for tubes with a maximum volume of 12 ml.

CM-6MT multicentrifuge is a newest laboratory apparatus with considerably improved performance characteristics which expands the application range of the centrifuge and improves its capabilities.

Properties of CM-6MT centrifuge:

Rotor speed up to 3500 rpm.

Rotor speed can be set and indicated on the rotor speed indicators and

Possibility to set the speed in the CPU or G.

Lock the lid during operation.

Unbalance sensor.

Automatic unlocking, lid opening and audible alarm when the rotor stops.

Quiet operation.

Precise, digital rotor speed setting.

Virtually unlimited continuous operation.

Six brake stages.

Centrifuges have passed a complete cycle of tests and expertise of MOH of Ukraine, are included in the register of medical equipment and allowed for use in medical practice. Availability of registration certificate of the Ministry of Health of Ukraine guarantees efficiency and safety in use of medical equipment.

The products are certified according to international quality standard ISO 9001:2008.

The warranty period is 12 months.

Technical characteristics

Centrifugation speed, rpm. 100-3500

Maximum gravity field, RCF 2300

Noise level, max, dB 55

Timer,min 1-99

Discontinuity of the rotor speed adjustment, r/min 100

Operating temperature range, gr.С +10...+40

Permissible humidity of environment,% 80

Mains power supply, V, Hz 220, 50

Maximum power consumption, W 250

Dimensions, mm 430x410x220

Mass, kg 12,6

CM-70 hematocrit centrifuge

Description

Centrifuge CM-70 ELMI is intended for determination of hematocrit number of blood. The centrifuge rotor is equipped with removable capillary adapters and has a transparent lid. Centrifuge has an electronic time relay which disconnects the drive at the end of centrifugation. Equipped with an angular rotor for 12 capillaries.

The smallest dimensions, easy operation, practically no noise and vibration provide high efficiency and convenience in operation.

QUALITY

- Smooth start-up of the rotor

- Automatic rotor switch-off after a set time interval

- Audible warning if the rotor stops

Technical features

No. of capillaries in rotor 12

Capillary position in the rotor, deg. to horizon 50

Rotor speed, rpm 7000

Gravitation field, G6500

Maximum noise level 30 dB

Working temperature range, C 4-45

Allowed humidity at 20 C, % 80

AC 220V

Power Consumption, W 70

Overall dimensions, mm:

length 190

width 170

height 125

Weight, kg max 2,3

Capillaries used, mm:

diameter max 1,5-1,6

length max 75

Centrifugation time 5 min.

Hematocrit centrifuge SM-7

Description

CM-7 centrifuge is designed for determination of hematocrit number of blood. Hematocrit centrifuge is used in clinical laboratory diagnostics and carrying out researches in medical and research laboratories. The centrifuge has an electronic time relay which disconnects the drive at the end of centrifugation. It is equipped with a rotor for 24 hematocrit capillaries. The centrifuge rotor is closed with a lid.

Fewer capillaries are possible, provided the rotor is balanced.

FEATURES:

Suction cup shaped feet for exceptional stability and low noise and vibration during operation;

low power consumption;

electronic lid opening lock until the rotor comes to a complete standstill;

smooth start-up of the rotor;

Automatic rotor shutdown after a set time interval;

audible alarm of the rotor stopping;

electronic blocking of the lid opening until the rotor comes to a complete stop.

Centrifuges meet the requirements of Technical Regulations for in vitro diagnostic medical devices, are registered in the certification center and approved for use in medical practice. Availability of the Certificate of evaluation of technical documentation of the medical device guarantees efficiency and safety of medical equipment use.

The products are certified according to the international quality standard of medical devices ISO 13485:2003.

Technical characteristics

Number of capillaries in the rotor 24

Rotor speed, rpm 12000

Maximum separation factor, RCF, g 15300

Noise level, dB max 40

Power supply, V 220

Overall dimensions, mm (LxWxH) 300x290x265

Mass, kg 10

Capillaries used, mm: 1,6х75

Centrifugation time, min. 5

Service life, years at least 5

Centrifuge for plasmolifting CM-3

Description

CM-3 centrifuge has full functionality at a low price.

Rotor speed (from 1000 to 4000 rpm, with 500 rpm increment) and working time (from 0 to 60 min) are set on electronic control panel. During operation, the electronic display shows the actual rotational speed and duration of centrifugation. It is possible to change centrifugation time and speed during centrifuge operation. The centrifuge is restarted according to the previous program.

The CM-3 centrifuge for tubes is equipped with a 6-seat rotor for 15 ml tubes. The centrifuge accommodates a paired number of tubes of different volumes and sizes. The centrifuge also accommodates both glass and plastic standard tubes of different sizes.

ADVANTAGES:

The design of the mounting feet is in the form of suction cups and provides exceptional stability and low noise and vibration during operation;

Electronic locking of the motor when the cover is open;

Smooth acceleration and braking of the centrifuge rotor;

Visual control through the transparent window in the top lid;

unbalance of masses in diametrically opposite sleeves 3g;

Minimal noise level due to the use of modern polymer housing with noise-absorbing elements;

low power consumption;

patented centrifuge design;

The warranty period is 24 months.


Technical characteristics

Voltage of power supply, V 220

Frequency, Hz 50

Power consumption, W max 70

Maximum separation factor, g 1790

Maximal volume of centrifugate, ml 90

Number of test tubes 6

Maximum volume of centrifugate in test tube, ml 15

Max size of test tubes to be used, mm (diameter x height) 17 x 120

Rotor speed, rpm 1000-4000

Timer, min. 0...60

Noise level, dB max 43,8

Overall dimensions, mm 320х340х280

Mass, kg 4

Service life, years at least 5

Laboratory centrifuge CM-3

Description

CM-3 portable medical laboratory centrifuge of periodic action with rotation speed up to 4000 rpm. It is designed for dividing heterogeneous liquid systems into fractions with density of up to 2 g/cm3.

The registration certificate of the Ministry of Health ensures the efficiency and safety in the use of medical equipment.

Products are certified according to international medical devices quality standard ISO 13485:2003.

CM-3 centrifuge is used in clinical laboratory diagnostics and carrying out researches in laboratories of medical and scientific research institutions. Use of CM-3 centrifuge is especially justified in small laboratories. CM-3 centrifuge has full functionality at a low price.

Rotor speed (from 1000 to 4000 rpm, in increments of 500 rpm) and working time (from 0 to 60 min) are set on electronic control panel. During operation, the electronic display shows the actual rotational speed and duration of centrifugation. It is possible to change centrifugation time and speed during centrifuge operation. The centrifuge is restarted according to the previous program.

The CM-3 centrifuge for tubes is equipped with a 6-place rotor for 15 ml tubes. It is able to centrifuge both glass and plastic standard tubes in different sizes as well as vacuum-tainer tubes.

BENEFITS:

suction cup design of the mounting feet provides exceptional stability and low noise and vibration during operation;

Electronic motor startup lock with open lid;

Smooth acceleration and deceleration of the centrifuge rotor;

Visual control through the transparent window in the top lid;

unbalance of masses in diametrically opposite sleeves 3g;

Minimal noise level due to the use of modern polymer housing with noise-absorbing elements;

low power consumption;

patented centrifuge design;

Technical characteristics

Power supply voltage, V 220

Frequency, Hz 50

Power consumption, W max 70

Maximum separation factor, g 1790

Maximal volume of centrifugate, ml 90

Number of test tubes 6

Maximum volume of centrifugate in test tube, ml 15

Maximum size of test tubes to be used, mm (diameter x height) 17x120

Rotor speed, rpm 1000...4000

Timer, min. 0...60

Noise level, dB max 43,8

Overall dimensions, mm 320х340х280

Mass, kg 4

Service life, years at least 5

Laboratory centrifuge CM-3.01

Description

CM-3.01 centrifuge is analogous to the following centrifuges: OPn-3, OPn-3.01, OPn-3.02, OPn-3M, CM-6, CM-6M, Liston C2201, CLMN-R10-01-Elecon.

Portable laboratory medical batch centrifuge with rotation speed up to 4000 rpm. Intended for dividing heterogeneous liquid systems into fractions with density up to 2 g/cm3.

Centrifuges have passed a full cycle of tests and expertise of the Ministry of Health of Ukraine, are entered in the register of medical equipment and approved for use in medical practice. Registration certificate of Ministry of Health of Ukraine guarantees efficiency and safety for medical equipment use.

Production is certified according to international standard of medical devices quality ISO 13485:2003.

Centrifuge CM-3.01 is used in clinical laboratory diagnostics and carrying out researches in laboratories of medical and scientific research institutions. Rotor speed (up to 4000 rpm, in increments of 500 rpm) and working time (from 0 to 60 min.) are set up on the electronic control unit. During operation, the electronic LED display shows the rotational speed or the remaining time of the centrifugation cycle. It is possible to change the operation time and rotation speed during operation of the medical centrifuge CM-3.01. The centrifuge is restarted according to the previous program.

The CM-3.01 laboratory centrifuge lid has an electronic interlock to start the centrifuge when the lid is open. The microprocessor control unit of the CM-6 laboratory centrifuge has an LED display.

The CM-3.01 centrifuge for test tubes is equipped with a 12-seat rotor. The centrifuge can be used with glass and plastic standard tubes of different sizes as well as with vacuum-tainer tubes.

ADVANTAGES:

suction cup design of the mounting feet provides exceptional stability and low noise and vibration during operation;

Electronic motor switch-on lock with open lid;

Precise, digital rotor speed adjustment;

Smooth acceleration and deceleration of the centrifuge rotor;

possibility of visual control through the transparent window in the top cover;

Unbalance of masses in diametrically opposite casings up to 3g;

Minimal noise level due to the use of modern polymer housing with noise-absorbing elements;

low power consumption;

patented centrifuge design and construction;

Technical characteristics

Power supply voltage, V 220

Frequency, Hz 50

Power consumption, W max 90

Maximum separation factor, g 1790

Maximal volume of centrifugate, ml 180

Number of test tubes 12

Maximum volume of centrifugate in test tube, ml 15

Maximum size of test tubes to be used, mm (diameter x height) 17x120

Rotor speed, rpm 1000...4000

Timer, min. 0...60

Noise level, dB max 41,2

Overall dimensions, mm (ÄÕÕÕÕÂ) 370х370х330

Mass, kg 7

Service life, years at least 5

Laboratory centrifuge CM-3M for 15 ml tubes

Description

CM-3M centrifuge is analogous to the following centrifuges: OPn-3, OPn-3.01, OPn-3.02, OPn-3M, CM-6, CM-6M, Liston C2201, CLMN-R10-01-Elecon.

CM-3M portable laboratory medical centrifuge for 15 ml tubes with batch speed up to 4000 rpm. It is designed for dividing heterogeneous liquid systems into fractions with density up to 2 g/cm3. CM-3M centrifuge is used in clinical laboratory diagnostics and carrying out researches in medical and research laboratories.

Rotor speed (up to 4000 rpm, in increments of 100 rpm) and working time (from 0 to 60 min.) are set on an electronic control panel of CM-3M laboratory centrifuge. During operation, the rotational speed and remaining centrifugation cycle time are displayed on the electronic display. It is possible to change operation time and rotation frequency during operation of CM-3M centrifuge. The centrifuge is restarted according to the previous program. At the end of operation, when the rotor stops completely, a signal will sound ready for unloading. The lid is opened by pressing the corresponding button on the control unit. The centrifuge also has a mechanism for emergency forced opening of the lid, which allows you to open the lid in the absence of electricity.

CM-3M laboratory centrifuge lid has an electronic lock that excludes the possibility of opening the lid of the centrifuge until the rotor comes to a complete stop. The electronic control unit is equipped with a backlit LCD display.

CM-3M centrifuge for test tubes is equipped with a 12-place rotor for 15 ml test tubes. The centrifuge accepts glass and plastic standard tubes of different sizes as well as the vacuum tube type.

BENEFITS:

Innovative centrifuge design with new motor, housing and control unit

The suction cup shaped feet ensure high stability and low noise and vibration level during operation;

Electronic centrifuge opening actuator;

Electronic lid opening lock until the rotor comes to a complete stop;

precise, digital rotor speed setting;

smooth microprocessor-controlled acceleration and deceleration of the centrifuge rotor;

possibility of visual control through the transparent window in the top cover;

Unbalance of masses in diametrically opposite liners up to 3 g;

Minimal noise and vibration levels due to the new design of the motor suspension;

low power consumption;

patented centrifuge design and construction;

Centrifuges meet the requirements of the Technical regulations for in vitro diagnostic medical devices, have been registered in the certification center and are approved for use in medical practice. Availability of the Certificate of evaluation of technical documentation of the medical device guarantees efficiency and safety of medical equipment use.

Production is certified according to the international standard of medical devices quality ISO 13485:2003.

Technical characteristics

Voltage of power supply, V 220

Frequency, Hz 50

Power consumption, W max 90

Maximum separation factor, g 1933

Maximal volume of centrifugate, ml 180

Number of test tubes 12

Maximum volume of centrifugate in test tube, ml 15

Max size of test tubes to be used, mm (diameter x height) 17 x 120

Rotor speed, rpm 1000...4000

Timer, min. 0...60

Noise level, dB max 37

Overall dimensions, mm (HxHW) 420х340х280

Mass, kg 9

Service life, years at least 5

Laboratory centrifuge CM-3M.01 for 50 ml.

Description

CM-3M.01 centrifuge is analogous to the following centrifuges: CM-6M.01 centrifuge for 50 ml tubes.

CM-3M.01 centrifuge is the newest development of the company with improved ergonomics and technical characteristics. It is equipped with a modern engine and new suspension design, providing the lowest noise and vibration level of any centrifuge of its kind. Smooth acceleration and braking dynamics, controlled by the microprocessor, have been dramatically improved. Electronic drive of the lid of laboratory centrifuge CM-3M.01 provides safety of work of the personnel. A new microprocessor unit of centrifuge with a large LCD display has a new operating algorithm.

CM-3M.01 portable medical laboratory centrifuge for 50 ml test tubes is a batch centrifuge with a speed of up to 4000 rpm. It is designed for dividing heterogeneous liquid systems into fractions with density up to 2 g/cm3. CM-3M.01 centrifuge is used in clinical laboratory diagnostics and carrying out researches in medical and research laboratories.

Rotor speed (up to 4000 rpm, in increments of 100 rpm) and working time (from 0 to 60 min.) are set on an electronic control panel of CM-3M.01 laboratory centrifuge. During operation, the electronic display shows the rotational speed and the remaining time of the centrifugation cycle. It is possible to change the operation time and rotation frequency during the operation of the centrifuge CM-3M.01. The centrifuge is restarted according to the previous program. At the end of operation, after the rotor has stopped completely, the ready for unloading signal will sound. The lid is opened by pressing the corresponding button on the control unit. The centrifuge also has a forced emergency lid opening mechanism that allows you to open the lid in the event of a power failure.

The centrifuge lid of laboratory centrifuge CM-3M.01 has an electronic interlock that excludes the possibility of opening the centrifuge lid until the rotor comes to a complete stop. The electronic control unit of the CM-6M laboratory centrifuge is equipped with an illuminated LCD display.

CM-3M.01 centrifuge for test tubes is equipped with a 6-seat rotor for Falcon 50 ml tubes.

BENEFITS:

Innovative centrifuge design with new motor, housing and control unit

The suction cup shaped feet ensure high stability and low noise and vibration level during operation;

Electronic centrifuge opening actuator;

Electronic lid opening lock until the rotor comes to a complete stop;

precise, digital rotor speed setting;

smooth microprocessor-controlled acceleration and deceleration of the centrifuge rotor;

possibility of visual control through the transparent window in the top cover;

Unbalance of masses in diametrically opposite liners up to 3 g;

Minimal noise and vibration levels due to the new design of the motor suspension;

low power consumption;

patented centrifuge design and construction;

Centrifuges meet the requirements of the Technical regulations for in vitro diagnostic medical devices, are registered in the certification center and approved for use in medical practice. Availability of the Certificate of evaluation of technical documentation of the medical device guarantees efficiency and safety of medical equipment use.

Production is certified according to the international standard of medical devices quality ISO 13485:2003.

Technical characteristics

Voltage of power supply, V 220

Frequency, Hz 50

Power consumption, W max 90

Maximum separation factor, g 1828

Maximum volume of centrifugate, ml 300

Number of test tubes 6

Maximum volume of centrifugate in test tube, ml 50

Max size of test tubes to be used, mm (diameter x height) 30x135

Rotor speed, rpm 1000...4000

Timer, min. 0...60

Noise level, dB max 37

Overall dimensions, mm (HxHW) 420х340х280

Mass, kg 10

Service life, years at least 5

Laboratory centrifuge CM-3MT for 24 samples.

Description

Centrifuge CM-3MT is analogous to the following centrifuges: centrifuge CM-6MT with 6M.02 rotor for 24 samples (sample capacity 6M.02).

CM-3MT centrifuge is the newest development of the company with improved ergonomics and technical characteristics. The centrifuge has a powerful brushless asynchronous motor with feedback and a new design of suspension. Smooth acceleration and braking dynamics controlled by the microprocessor have been improved many times over. Electronic drive of the CM-3MT laboratory centrifuge lid and built-in unbalance sensor ensure safety of personnel work. New microprocessor unit of centrifuge with large LED display has new algorithm of operation.

Portable laboratory medical centrifuge CM-3MT of batch operation with rotational speed up to 4000 rpm. It is designed to separate heterogeneous liquid systems with density up to 2 g/cm3 into fractions. CM-3MT centrifuge is used for clinical laboratory diagnostics and researches in medical and research laboratories.

Rotor speed (up to 4000 rpm, in increments of 100 rpm) and working time (from 0 to 99 min) are set on an electronic control unit of CM-3MT laboratory centrifuge. During operation, the LED display shows the remaining centrifugation cycle time and rotor speed in units of relative centrifugal acceleration of RCF G or RPM rpm. It is possible to change the operating time and rotational speed during operation of the CM-3M centrifuge. The centrifuge is restarted according to the previous program. At the end of operation, when the rotor is completely stopped, the ready for unloading signal will sound and the lid will open. The centrifuge also has a forced emergency lid opening mechanism that allows you to open the lid in the event of a power failure. If the centrifuge operates with an unbalanced rotor, the control unit will stop the rotor and inform about the emergency mode.

The CM-3MT laboratory centrifuge lid is electronically interlocked to prevent the lid from opening until the rotor stops completely. The CM-6MT laboratory centrifuge electronic control unit is equipped with an LED display.

The CM-3MT centrifuge for test tubes is equipped with a 24-seat rotor for vacutainer-type test tubes. CM-6MT centrifuge can be used with both glass and plastic standard tubes of different sizes.

BENEFITS:

Innovative centrifuge design with asynchronous brushless motor with maximum service life;

The suction cup shaped feet ensure outstanding stability and low noise and vibration level during operation;

Electronic centrifuge opening actuator;

Display of rotor speed RPM rpm, or in units of relative centrifugal acceleration DCF/RCF G;

electronic lid opening interlock until the rotor comes to a complete stop;

unbalance sensor;

precise, digital rotor speed setting;

Smooth microprocessor-controlled centrifuge rotor acceleration and deceleration;

possibility of visual control through the transparent window in the upper lid;

Unbalance of masses in diametrically opposite liners up to 3 g;

minimum noise and vibration level due to the new construction of the motor suspension;

low power consumption;

patented centrifuge design and construction;

Centrifuges meet the requirements of the Technical regulations for in vitro diagnostic medical devices, have been registered in the certification center and are approved for use in medical practice. Availability of the Certificate of evaluation of technical documentation of the medical device guarantees efficiency and safety of medical equipment use.

Production is certified according to the international standard of medical devices quality ISO 13485:2003.

Technical characteristics

Voltage of power supply, V 220

Frequency, Hz 50

Power consumption, W max 120

Maximum separation factor, g 1700

Maximal volume of centrifugate, ml 288

Number of test tubes, pcs. 24

Maximum volume of centrifugate in test tube, ml 12

Max size of test tubes to be used, mm (diameter x height) 16x100

Rotor speed, rpm 100...4000

Timer, min. 0...99

Noise level, dB max 45

Overall dimensions, mm  430x310x290

Mass, kg 15

Service life, years at least 5

Laboratory centrifuge CM-3MT.S

Description

CM-3MT.S centrifuge is analogous to CM-6M and OPn-3M centrifuges.

CM-3MT.S centrifuge is the newest development of the company with improved ergonomics and technical characteristics. Powerful asynchronous brushless motor with feedback and new construction of suspension is installed in centrifuge. Smooth acceleration and braking dynamics controlled by the microprocessor have been improved many times over. Electronic drive of the CM-3MT.S laboratory centrifuge lid and built-in unbalance sensor ensure safety of personnel work. New microprocessor unit of centrifuge with a large LED display has a new algorithm of work.

CM-3MT.S portable medical laboratory batch centrifuge with a speed of up to 4000 rpm. It is designed for fractional separation of heterogeneous liquid systems with density up to 2 g/cm3. CM-3MT.S centrifuge is used for clinical laboratory diagnostics and carrying out researches in laboratories of medical and scientific research institutions.

Rotor speed (up to 4000 rpm, in increments of 100 rpm) and working time (from 0 to 99 min) are set on an electronic control unit of CM-3MTS laboratory centrifuge. During operation, the LED display shows the remaining centrifugation cycle time and rotor speed in units of relative centrifugal acceleration of RCF G or RPM rpm. It is possible to change the operating time and rotational speed during operation of medical CM-3MTS centrifuge. The centrifuge is restarted according to the previous program. At the end of operation, when the rotor stops completely, a signal ready for unloading will sound and the lid will open. The centrifuge also has a forced emergency lid opening mechanism that allows you to open the lid in the event of a power failure. If the centrifuge is running with an unbalanced rotor, the control unit will stop the rotor and inform about the emergency mode.

The CM-3MT laboratory centrifuge lid has an electronic interlock that prevents the centrifuge lid from being opened until the rotor comes to a complete stop. The electronic control unit of the CM-6MT laboratory centrifuge is equipped with an LED display.

The CM-3MT.S test tube centrifuge is equipped with an 8-seat stainless steel vial rotor. When the rotor is in operation, the tubes go into the horizontal position. The centrifuge can use glass and plastic standard tubes of different sizes as well as vacuum tubes of vacutainer type.

BENEFITS:

Innovative centrifuge design with asynchronous brushless motor with maximum service life;

The suction cup shaped feet ensure outstanding stability and low noise and vibration level during operation;

Electronic centrifuge opening actuator;

Display of rotor speed RPM rpm, or in units of relative centrifugal acceleration DCF/RCF G;

electronic lid opening interlock until the rotor comes to a complete stop;

unbalance sensor;

precise, digital rotor speed setting;

Smooth microprocessor-controlled centrifuge rotor acceleration and deceleration;

possibility of visual control through the transparent window in the upper lid;

Unbalance of masses in diametrically opposite liners up to 3 g;

minimum noise and vibration level due to the new construction of the motor suspension;

low power consumption;

patented centrifuge design and construction;


Centrifuges meet the requirements of the Technical regulations for in vitro diagnostic medical devices, are registered in the certification center and approved for use in medical practice. Availability of the Certificate of evaluation of technical documentation of the medical device guarantees efficiency and safety of use of medical equipment.

Production is certified according to the international standard of medical devices quality ISO 13485:2003.

Technical characteristics

Voltage of power supply, V 220

Frequency, Hz 50

Power consumption, W max 120

Maximum separation factor, g 1700

Maximal volume of centrifugate, ml 96

Number of test tubes, pcs. 8

Maximum volume of centrifugate in test tube, ml 12

Max size of test tubes to be used, mm (diameter x height) 16x100

Rotor speed, rpm 100...4000

Timer, min. 0...99

Noise level, dB max 45

Overall dimensions, mm (HxLxW) 430x310x290

Mass, kg 15

Service life, years at least 5

Laboratory centrifuge CM-5

Description

CM-5 centrifuge is analogous to ELMI centrifuge CM-50.

CM-5 centrifuge is a batch-type laboratory medical centrifuge with the rotation speed up to 16000 rpm. It is designed for fractional separation of heterogeneous liquid systems with density up to 2 g/cm3.

The CM-5 is one of the most compact and powerful centrifuges on the market. Thanks to the patented aerodynamic chamber and the high-tech motor, noise and heating are reduced to record-low levels. The CM-5 high-speed centrifuge has a rotor speed of up to 16,000 rpm. Microtube centrifuge has a brushless asynchronous motor with a new suspension design to provide the lowest noise and vibration level of any centrifuge of its kind. Smooth acceleration and braking dynamics controlled by the microprocessor are improved many times over. Electronic drive of the CM-5 laboratory centrifuge lid ensures safety of the personnel work.

CM-5 laboratory centrifuge is equipped with an angular rotor for twelve Eppendorf tubes of 1.5; 2 ml. Simple and reliable construction of the device and digital control system allows to use CM-50 centrifuge widely in clinical laboratory diagnostics and carrying out researches in medical and scientific laboratories.

Microprocessor control system of CM-50 centrifuge provides smooth rotor start-up, indicating on LED indicators rotor time and speed in units of relative centrifugal acceleration (RCA/RCF) or rpm, locking the lid during rotor rotation, audible alarm of rotor stop, automatic unlocking of the lid after centrifuge stop.

Ease of operation, practical absence of noise and vibration ensure high performance and convenience of CM-5 centrifuge for laboratories.

BENEFITS:

Innovative centrifuge design with new motor, housing and control unit;

Time and speed of the rotor can be set and indicated in different units by means of light indicators;

Smooth acceleration and deceleration of the centrifuge rotor;

saving the set centrifugation parameters in the non-volatile memory when switching off;

audible alarm of the rotor stopping;

possibility of visual control through the transparent window in the top cover;

The feet are made in the form of suction cups and provide exceptional stability and low noise and vibration level during operation;

SHORT mode;

unbalance sensor;

minimal noise level due to the use of modern polymer housing with noise-absorbing elements;

low power consumption;

Patented centrifuge design;

Centrifuges meet the requirements of the Technical regulations for in vitro diagnostic medical devices, are registered in the certification center and approved for use in medical practice. Availability of the Certificate of evaluation of technical documentation of the medical device guarantees efficiency and safety of medical equipment use.

The products are certified according to the international quality standard of medical devices ISO 13485:2003.

Technical characteristics

Supply voltage, V 220

Frequency, Hz 50

Power consumption, W max 90

Number of microtubes set in the rotor, pcs. 12

Maximal volume of centrifugate, ml 24

Volume of tubes to be used, ml 1.5; 2.0

Angle of inclination of tubes in the rotor, gr 45

Rotor speed, RPM, rpm 100...16000

Timer, min. 1...60

Maximal separation factor, RCF, g 17800

Maximum noise, dB 46

Overall dimensions, mm  300x240x240

Mass, kg 15

Service life, years at least 5

ELMI CM-50 centrifuge

Description

ELMI CM-50 laboratory centrifuge is equipped with an angle rotor for twelve Eppendorf test tubes of 0,5-2 ml volume. Simple and robust construction of the device combined with a digital control system allows to use it widely in medicine, biology, etc.

Features

Time and rotor speed can be set and indicated on light indicators

Four levels of rotor braking

Display of rotation speed in the CPU

Retention of set centrifugation parameters in nonvolatile memory when the unit is switched off

Audible alarm of rotor stoppage

Automatic unlocking and opening of the lid

Advantages of

Smallest size of CM-50 centrifuge, simple operation, practically absence of noise and vibrations provide high productivity and convenience in work.

Technical parameters

PARAMETERS OF ROTORS USED

Number of adapters in rotor - 12 pieces.

Volume of used tubes 0.5; 1; 1.5; 2ml

Angle of inclination of tubes in the rotor 45°

TECHNICAL DATA

Centrifugation speed 1000 - 15000 RPM

Maximum gravity field 15294

Maximum noise 46 dB

Acceptable temperature range 10-40°C

80% permissible humidity at 20°C

Power supply 220, 50 V, Hz

Power consumption 120W

Dimensions (length x width x height) 200x180x145mm

Weight 3.1 kg