Distiller DE

Aquadistiller DE-10 

Description

Electric distiller DE-10 is designed for the production of distilled water in pharmacies, hospitals, various medical laboratories, where there is a need for distilled water.

The apparatus consists of an evaporation boiler, condenser with built-in separator and electric control unit. Operation is based on condensation of carefully separated steam. Tap water enters the evaporation boiler and is heated by electric heaters to boiling. The water level in the evaporation boiler is maintained automatically. The generated steam, passing through a number of separators, gets on the walls of the condenser, cooled from the outside by tap water and, condensing, flows out as distilled water. Control of water level in the evaporation boiler is carried out by an automatic device - level sensor, which in case of water level fall below the permissible level disconnects electric heaters from the network and prevents them from burning out. When the water level in the evaporation boiler drops, the aqua-distiller informs the personnel with a buzzer and a control lamp on the control unit. When the water supply is resumed and the evaporation boiler is refilled to the operating level, the unit goes into operation, without further intervention.

DISTINGUISHING FEATURES:

- Reduced energy and water consumption. Part of the heated water, after use in the condenser cooling circuit, goes to the evaporation boiler;

- Fast access inside the evaporation boiler, to clean the walls and electric heaters from the formed scale;

- The housing of the distillator is made of stainless steel, a chromium-nickel-titanium alloy. The high quality steel guarantees a good quality of the distilled water, as well as a long life time of the unit;

- The electric heaters are made of copper-nickel alloy, with increased resistance to oxidation;

- Personnel is informed by a buzzer and a control lamp about the unit shutdown in case of water level drop in the evaporation boiler, which prevents equipment downtime;

- Simple installation, which does not require specialized personnel;

- The aqua-distiller is convenient and reliable in operation.

Distillers have passed a full cycle of tests and examinations of MOH of Ukraine, included in the register of medical equipment and approved for use in medical practice.

Technical characteristics

Output, dm³/h, not less than 10

Maximum electric power, kW 7,5

AC current type, three-phase

Mains voltage, V 380

Overall dimensions, cm 420х300х900

Total water consumption, dm³/h, max 170

Weight, kg 10

Table design

Automatic water level control

Switching-off of electric heaters at stoppage of centralized water supply is automatic

Service life, years at least 5

Aquadistiller DE-20

Description

The DE-20 electric distiller is designed for the production of distilled water in pharmacies, hospitals, various medical laboratories, where there is a demand for distilled water.

The apparatus consists of an evaporation boiler, a condenser with a built-in separator and an electric control unit. Operation is based on condensation of carefully separated steam. Tap water enters the evaporation boiler and is heated by electric heaters to boiling. The water level in the evaporation boiler is maintained automatically. The generated steam, passing through a number of separators, gets on the walls of the condenser, cooled from the outside by tap water and, condensing, flows out as distilled water. Control of water level in the evaporation boiler is carried out by an automatic device - level sensor, which in case of water level fall below the permissible level disconnects electric heaters from the network and prevents them from burning out. When the water level in the evaporation boiler drops, the aqua-distiller informs the personnel with a buzzer and a control lamp on the control unit. When the water supply is resumed and the evaporation boiler is refilled to the operating level, the unit goes into operation, without further intervention.

DISTINGUISHING FEATURES:

- Reduced energy and water consumption. Part of the heated water, after use in the condenser cooling circuit, goes to the evaporation boiler;

- Fast access inside the evaporation boiler, to clean the walls and electric heaters from the formed scale;

- The housing of the distillator is made of stainless steel, a chromium-nickel-titanium alloy. The high quality steel guarantees a good quality of the distilled water, as well as a long life time of the unit;

- The electric heaters are made of copper-nickel alloy, with increased resistance to oxidation;

- Personnel is informed by a buzzer and a control lamp about the unit shutdown in case of water level drop in the evaporation boiler, which prevents equipment downtime;

- Simple installation, which does not require specialized personnel;

- The aqua-distiller is convenient and reliable in operation.

Technical characteristics

Performance, dm³/h, not less than 20

Maximum electric power, kW 15

AC current type, three-phase

Mains voltage, V 380

Overall dimensions, mm 500x350x800

Total water consumption, dm³/h, 260 max.

Weight, kg 14

Table design

Automatic water level control

Switching-off of electric heaters at stoppage of centralized water supply is automatic

Service life, years at least 5

Aquadistiller DE-5

Description

The DE-5 electric distillation unit is designed for distilled water production in pharmacies, hospitals, medical laboratories, where there is a demand for distilled water.

The apparatus consists of an evaporation boiler, a condenser with a built-in separator and an electric control unit. Operation is based on condensation of carefully separated steam. Tap water enters the evaporation boiler and is heated by electric heaters to boiling. The water level in the evaporation boiler is maintained automatically. The generated steam, passing through a number of separators, gets on the walls of the condenser, cooled from the outside by tap water and, condensing, flows out as distilled water. Control of water level in the evaporation boiler is carried out by an automatic device - level sensor, which in case of water level fall below the permissible level disconnects electric heaters from the network and prevents them from burning out. When the water level in the evaporation boiler drops, the aqua-distiller informs the personnel with a buzzer and a control lamp on the control unit. When the water supply is resumed and the evaporation boiler is refilled to the operating level, the unit goes into operation, without further intervention.

DISTINGUISHING FEATURES:

- Reduced energy and water consumption. Part of the heated water, after use in the condenser cooling circuit, goes to the evaporation boiler;

- Fast access inside the evaporation boiler, to clean the walls and electric heaters from the formed scale;

- The housing of the distillator is made of stainless steel, a chromium-nickel-titanium alloy. The high quality steel guarantees a good quality of the distilled water, as well as a long life time of the unit;

- The electric heaters are made of copper-nickel alloy, with increased resistance to oxidation;

- Personnel is informed by buzzer and control lamp about the unit shutdown due to water level drop in the evaporation boiler, which prevents downtime of the equipment;

- Simple installation, which does not require specialized personnel;

- The aqua-distiller is convenient and reliable in operation.

Technical characteristics

Capacity, dm³/h, not less than 5

Maximum electric power, kW 4,5

AC current type, single-phase

Mains voltage, V 220

Overall dimensions, mm 350x260x780

Total water consumption, dm³/h, max. 95

Weight, kg 8

Table design

Automatic water level control

Switching-off of electric heaters at stoppage of centralized water supply is automatic

Service life, years at least 5

DE-10C distillation unit

Description

The electric bidistillator (distiller) DE-10S is designed to produce double distilled water of high purity level. It is used in pharmacies, hospitals, various medical laboratories, where there is a need for distilled water. The bidistillers implement the principle of double distillation. The distilled water obtained from the first circuit enters the evaporation boiler of the second circuit and is distilled again. The distilled water has improved physical and chemical properties.

The apparatus consists of two evaporation boilers, condensers with integrated separators and a common electric control unit. Operation is based on condensation of thoroughly separated steam. Tap water enters the evaporation boiler of the first circuit and is heated by electric heaters to boiling. The water level in the evaporation boiler is maintained automatically. The generated steam, passing through a number of separators, hits the walls of the condenser, cooled from the outside by tap water and, condensing, goes to distilled water. Further, the distilled water obtained fills the boiler in the second circuit. After filling the boiler of the second circuit to the working mark, electric heaters are switched on and the process of re-distillation (bidistillation) takes place. Control of the water level in the evaporation boilers is carried out by sensor level sensors separately for each circuit. If the water level in the evaporation boiler drops, the THEN is turned off automatically. When the water supply is resumed and the evaporation boiler is refilled to the operating level, the unit goes into operating condition, without additional intervention.

DISTINCTIVE FEATURES:

- Reduced energy and water consumption. Part of the heated water, after use in the condenser cooling circuit, goes to the evaporation boiler;

- Fast access inside the evaporation boiler, to clean the walls and electric heaters from scale formation;

- The housing of the distillator is made of stainless steel, a chromium-nickel-titanium alloy. The high quality steel guarantees a good quality of the distilled water, as well as a long life time of the unit;

- The electric heaters are made of copper-nickel alloy, with increased resistance to oxidation;

- Personnel are informed by buzzer and control lamp about shutdown of the unit due to lowering of water level in the evaporation boiler, which prevents downtime of the equipment;

- Simple installation, which does not require specialized personnel;

- The bidistillator is comfortable and reliable in operation.

Technical characteristics

Capacity, dm³/h 10

AC three-phase current

Maximum electric power, kW 17

Mains voltage, V 380

Overall dimensions, mm 420х800х900

Total water consumption, dm³/h, max 290

Weight, kg 24

Table design

Automatic water level control

Switching-off of electric heaters at stoppage of centralized water supply is automatic

Service life, years, min 5

Ten 6

Aquadistiller DE-5C

Description

The electric bidistillator (distiller) DE-5S is designed for producing double distilled water with an increased level of purification. It is used in pharmacies, hospitals, various medical laboratories, where there is a need for distilled water. The bidistillators implement the principle of double distillation. The distilled water obtained from the first circuit enters the evaporation boiler of the second circuit and is subjected to a second distillation. The distilled water has improved physical and chemical properties.

The apparatus consists of two evaporation boilers, condensers with integrated separators and a common electric control unit. Operation is based on condensation of thoroughly separated steam. Tap water enters the evaporation boiler of the first circuit and is heated by electric heaters to boiling. The water level in the evaporation boiler is maintained automatically. The generated steam, passing through a number of separators, hits the walls of the condenser, cooled from the outside by tap water and, condensing, goes to distilled water. Further, the distilled water obtained fills the boiler in the second circuit. After filling the boiler of the second circuit to the working mark, electric heaters are switched on and the process of re-distillation (bidistillation) takes place. Control of the water level in the evaporation boilers is carried out by sensor level sensors separately for each circuit. If the water level in the evaporation boiler drops, the THEN is turned off automatically. When the water supply is resumed and the evaporation boiler is refilled to the operating level, the unit goes into operating condition, without additional intervention.

DISTINCTIVE FEATURES:

- Reduced energy and water consumption. Part of the heated water, after use in the condenser cooling circuit, goes to the evaporation boiler;

- Fast access inside the evaporation boiler, to clean the walls and electric heaters from scale formation;

- The housing of the distillator is made of stainless steel, a chromium-nickel-titanium alloy. The high quality steel guarantees a good quality of the distilled water, as well as a long life time of the unit;

- The electric heaters are made of copper-nickel alloy, with increased resistance to oxidation;

- Personnel are informed by buzzer and control lamp about shutdown of the unit due to lowering of water level in the evaporation boiler, which prevents downtime of the equipment;

- Simple installation, which does not require specialized personnel;

- Bidistillator convenient and reliable in operation.

Technical characteristics

Output, dm³/h, not less than 5

Type of current AC three-phase

Maximum electric power, kW 10

Mains voltage, V 380

Overall dimensions, mm 350x700x780

Total water consumption, dm³/h, max 145

Weight, kg 20

Table design

Automatic water level control

Switching-off of electric heaters at stoppage of centralized water supply is automatic

Service life, years, not less 5

Ten 6