Holmen NHP100 Ligno-tester pellet fragility tester

Portable

Designed for pelleted feed

Fast and easy to use

Adjustable test time

Small particles are removed during analysis

The tester measures the strength of animal feed pellets.

This is a test method recognized worldwide.

"Getting results up to 4 times faster than when using drum type testers"

This is an entry-level pellet friability tester that is used to calculate the pellet friability index (PII) by simulating pellet transport conditions from producer to consumer.

It is easy to transport from place to place for local inspections.

It only needs to be placed on a flat and stable surface.

Pellets are loaded into a perforated mesh hopper

From the bottom of the bunker under a pressure of 70 mbar. a stream of air is supplied, which lifts the granules up

The pellets collide with each other and with the walls of the hopper

Fine particles are filtered through a hopper into a chamber below where they can be removed.

The NHP 100 with its standard 2.5 mm diameter perforated hopper is ideal for testing pellets with a diameter of 3-12 mm. Optionally available hoppers with hole diameters from 1.25 to 4 mm.

Set the test time to 30, 60, 90 or 120 seconds according to the pellet size range.

Before loading the sample into the hopper, the operator must sift and weigh the sample.

After the test cycle, the sample must be reweighed. After that, the operator can

calculate the indicator "Index of fragility of granules" (ICG).

Fine particles and dust are removed during the testing process to produce reliable and accurate readings

The results.

- Manual management;

- weight of the tested sample – 100 g;

- The diameter of the holes in the chamber is 2.5 mm;

- Research time – 30, 60, 90 or 120 s

- Working pressure - 70 mBar

Dimensions: 440 x 300 x 440 mm

Weight: 17.5 kg