Laboratory automatic press PVOL-20T-A

1) Versatility: suitable not only for extracting oil from sunflowers but also soybeans, rapeseed and any other oil crops. One equipment - several solutions.

2) Speed: the sample is pressed in 30 seconds! Time and convenience are decisive factors when choosing a device for any laboratory. And for faster and more harmonious operation, order the optional equipment kit.

3) Convenient: The automatic press is indispensable in laboratories with a high workload because the squeezing process is effortless for the laboratory assistant.

4) Ease: The sleek and lightweight design of the squeezer is simple to assemble/disassemble, making it easy and fast for the lab technician. Assembly/disassembly time 10-20 seconds.

5) Easy: the equipment set includes a cup for cake removal - the most technologically advanced design of all presses on the market. Thanks to this part the cleaning of the press from dense oil-bearing crops like soybeans is very fast and easy. It's enough just to place the cup and the waste cylinder on the base and the press itself will squeeze out the cake piston in a few seconds.

It comes with all the tools necessary for the job:

1) Aluminum scoop. Non-corrosive, wear-resistant. Ergonomic handle and optimum size for picking grains.

2) Stainless cup for picking up oil. Also corrosion-free and wear-resistant. Has enough volume for easy sampling and further use.

3) A nozzle for cleaning the cylinder bores. The equipment must be thoroughly cleaned after skin-pressing to avoid inaccuracies in the oil analysis figures. But cleaning 1.5 mm holes is a difficult task in everyday life. To simplify this action, the kit comes with a special ramrod designed for cleaning such hard-to-reach places.

4) A brush to clean the platen spout. The plate spout is no less problematic to clean than the cylinder orifices. Then a brush comes to the rescue, which will fit tightly into the diameter of the spout, thereby ensuring quality cleaning.

5) A bucket for the waste material. For ease of operation and to quickly get rid of the cake next to the baler is placed a clear plastic bucket with a large capacity.



TECHNICAL CHARACTERISTICS

Set weight: 77 kg (with oil)

Overall dimensions:

- 500х250х300 mm (high-pressure station)

- 550x250x250 mm (working part)

High pressure hose length: 1.5 m

Power supply: 0.75 kW;

Power supply: 220V, 50Hz;

Nominal force: 15 tonnes

Max. outreach: 100 mm